Servo Manifold

ETS/TS Manifold (Fast Acting Solenoid, Test Solenoid valves)

  • Manifold designed to give the customer the ability to safely replace the fast acting and test solenoid valves, while the unit was on line.
  • Lockable isolation valve, that shuts off the pressure port to the Fast- acting solenoid valve.
  • Bleed port that allows maintenance to verify there is no stored energy present before replacing the Fast- acting solenoid valve.
  • Pressure transmitter monitors emergency trip supply pressure, Verifying Trip/Reset function.
  • Flow meters Monitor the leakage of the Dump Valve.
  • Fast acting solenoid orifices are installed in the manifold by threading into the fluid ports. Eliminating lost orifices during solenoid valve replacement.
  • Test Solenoid Valve replacement.
  • Fluid actuator supply lockable isolation valve.
  • Bleed port that allows maintenance to verify there is no stored energy present before replacing Test solenoid valve.
  • Pressure transmitter monitors Fluid actuator supply pressure.
  • Test Solenoid orifices are installed in the manifold by threading into the fluid ports.

Cut Sheet

Contact Our Sales Team

Sales

Alison Mullins, MLT1
Outside Sales Manager
Cell: 205.492.5338
Email: alison@hydra-lube.net

Brandon Wright
Outside Sales Representative
Cell: 337.466.1916
Email: bwright@hydra-lube.net

Barry Sibul
Technical Sales Representative
Cell: 303.562.7814
Email:barry@hydra-lube.net